|
|
|
 |
 |
Areas of Expertise
|
 |
Design-Build and Construction Management
VITOK offers complete construction supervision services to insure a timely, economical and properly constructed facility.
Our management supervisors are responsible for field cost control, receiving and inspecting materials/equipment and overseeing
progress to maintain schedule, engineering codes, design compliance and budget.
|
|
 |
Control/Instrumentation
VITOK's control and instrumentation engineers devise new systems to control plant processes with precision as well as make
recommendations to correct or improve the occasional existing problematic control loop. By incorporating the latest PLC and
DCS control technology, We are able to integrate disparate systems into a synergistic whole.
|
|
 |
Chemical Process Engineers
Based on many years of experience, our staff has strong expertise in the areas of process design and instrumentation of
chemical and industrial plants, as well as pharmaceutical, food, automotive and other heavy manufacturing facilities.
|
|
 |
Electrical/Power
Our electrical engineering services include:
- Design of power distribution systems.
- Specification of substations and switchgear.
- Preparation of single line and connection diagrams.
- Specification of motor control centers.
- Design of emergency power back-up systems.
- Investigation and analysis of existing power systems.
|
|
 |
Architectural/Civil/Structural Engineers
Education and experience combine to give us expertise in the design of:
- Industrial plant architectural features.
- Pilings and foundations for buildings and a variety of industrial structures.
- Roads, railroads, grading and drainage.
- Underground piping systems.
- Rigid frame structures of concrete and steel.
- Composite concrete and steel floors.
- Pre-stresses and post-tensioned concrete structures.
- Modifications to existing structures.
- Supports for ducts and piping.
|
|
 |
Mechanical
VITOK mechanical design services include:
- Piping systems.
- Fire protection, HVAC, refrigeration and steam systems.
- All types of material handling systems for liquids, solids powders and gases.
- Packed towers; tray columns; high-pressure, high-temperature converters, heat exchangers; reactors and other special equipment.
- Air pollution control systems, vapor recovery units.
- Field and shop inspection of systems and equipment.
- Stress analysis of components and system failure analysis with recommendations for correction.
|
|
 |
Manufacturing
Many manufacturers of both hard and soft goods rely on the expertise
and multi-discipline capabilities of VITOK Engineers to solve perplexing
problems and facilitate production. We've worked on large and small
manufacturing projects in areas such as automotive, wire/cable, appliances,
paint/coatings and consumer products including toothpaste, soap, tires,
transportation fuel, cement, lead, batteries, word processors eyeglass
lenses, nitrogenated fertilizers and more.
|
|
 |
Forensic/Investigative Services
Because of our extensive knowledge in many areas, we have been asked to investigate fires, structural damage, foundation
settlement, electrical failures and other mishaps in industrial plants, commercial establishments and private residences.
Our training in how things work enables us to analyze what happens when they don’t.
|
|
|
Beverage/Food/Pharmaceutical
Our extensive experience with food, beverage and pharmaceutical industries is illustrated in the
projects listed below:
Beverage
Distillery
- Process control improvement.
- Bottle line redesign, efficiency improvement.
- Debottlenecking ethanol manufacturing process.
- Warehousing of barreled goods, as well as case goods and in-process inventory.
Brewery
- Brewhouse process development and redesign.
- Utility improvement.
- Individual process equipment redesign.
Soft Drinks/Water
- Process design for water sanitation, ozonating and filtering.
- Soft drink/product filtering and tempering.
- CIP systems for a variety of areas.
- Cooking, drying and conveying of solids and semi-solids.
- Equipment specifications for process improvement.
- Process piping, pumping, design and redesigning for new product implementation.
Foods
- Confectionery/sugar/nut handling and processing for candy manufacturers.
- Batch packaging and conveying.
- Final packaging for a variety of consumer food products.
- Edible oil deodorization and manufacture.
- Pet food processing (heating, cooling, blending and packaging.)
- High fiber cellular manufacture.
- Soybean, corn and other grain processing, both extraction of oils and drying
of spent grains.
Pharmaceutical
- Algae processing for baby food supplements.
- Specification and purchasing of high speed tableting machines.
- Development of components for new toothpaste research and development efforts.
- Process design for silicone fluids utilized in the human body.
- Laboratory equipment design installed for a large pharmaceutical company.
- Design of process lines/systems for pharmaceutical company.
|
|
|
|
| |
|
|
|
|
|
|
|
